Opens in a new tab

Complex work environments

Specialized execution

Maintenance Campaigns

Specialized execution

Specialized execution

Maintenance Campaigns

Request quoteRequest

Lassen op touw: gecertificeerd laswerk

Sky People B.V.

June 23, 2026

Rope access welding: certified welding in hard-to-reach places

Welding at heights or in confined spaces requires a safe and stable worksite. This often means scaffolding or a cherry picker, with all the time and costs involved. But for occasional or hard-to-reach welding, there's an alternative: welding via rope access, performed by technicians who are both certified welders and IRATA rope access specialists. In this article, you'll read how it works and when it's the smartest choice.

What does rope access welding involve?

With rope access welding, our specialists reach the worksite using rope and climbing techniques and perform the welding work from a stable, positioned working posture. No scaffolding or aerial work platform is needed to access the construction. This makes it possible to weld in places that are otherwise difficult to access or only accessible with a lot of preparation, such as high steel structures, pipe bridges, or offshore installations. The combination of craftsmanship and climbing technique is central to this: the welder safely reaches their position and delivers the same quality work there as on the ground.

What welding work do we perform at height?

Rope access is widely applicable, from short-term repairs to specialized work within larger projects.

Repair welding on steel structures

We can repair tears, deformations, or damage to steel structures on-site. Because we come directly to the part that needs welding, the installation or structure remains in operation as much as possible, and you limit downtime.

Welding on installations and offshore assets

in the Industry and petrochemicals English offshore We perform welding on installations, steel structures, and offshore assets. We often combine this in one team with other activities, such as flame cutting, inspection, or rigging, so that the entire job is completed by the same specialists.

Certification and safety in rope welding

Working at height imposes double demands: on welding quality and on rope access work methods. We meet both these requirements.

Certified welders and IRATA technicians

Our technicians possess the necessary welding certifications and are also IRATA certified for working with rope access techniques. Therefore, you will not receive a welder who happens to work at heights or a climber who happens to weld, but a specialist trained and tested in both.

Working safely with heat at height

Working with heat, sparks, and welding equipment at height requires strict preparation. We always work with at least two technicians, under the supervision of an IRATA Level 3 supervisor, and tailor the worksite, equipment, and safety measures to the situation. This ensures both the welder and the surroundings remain protected.

Why rope access welding is more efficient than scaffolding

The profit lies in access. A scaffold or aerial platform must first be transported, erected, and dismantled afterward. For a few hours or days of welding work, this is often disproportionate. With rope access, our technicians can be deployed immediately, no extensive construction is needed, and the disturbance to the surroundings is limited. For occasional and difficult-to-reach welding work, this results in time and cost savings, without compromising on quality or safety.

Outsource welding at height

Do you have welding work in a hard-to-reach place or at height? Check out our welding operations or ask your question directly to us. Plan a consultation of Request a no-obligation quote, then we will think with you about the best approach.

Frequently asked questions

Yes. Our specialists reach the worksite using rope techniques and weld from a stable, positioned working posture. Welding quality is equivalent to that performed at ground level.

Our technicians possess the necessary welding certifications and are also IRATA certified for rope access work. This ensures both welding quality and safety at height.

Including repair welds on steel structures and welding work on installations and offshore assets. We look at the best approach and welding method for each project.

Yes, provided it is well prepared. We work with a minimum of two technicians under the supervision of a Level 3 supervisor and coordinate all safety measures for working with heat at height.

Especially in the industry and petrochemical industry and offshore, but also wherever welding at height or in hard-to-reach places is required.

More information?

+31 (0) 183 73 3100

info@sky-people.nl